Two mining deaths within 24 hours in which the victims were working alone and in restricted areas where there were hazardous conditions highlights the need to observe best practices to avoid hazardous areas and avoid working alone, among other tips. Both were in underground mines, one coal and one limestone.
Download Alert (pdf) here.
On October 9, 2016, a 61 year old Equipment Operator, with 3 years of experience, was fatally injured at a sand surface mine. The victim was attempting to attach a screen plant to a front-end loader by hooking them together with a steel cable when the equipment moved pinning the victim. The victim was later discovered injured and leaning against the loader bucket. The victim died of his injuries the following day.
Best Practices
Click here for: MSHA Preliminary Report (pdf), The investigation will not be posted.
The Mine Safety and Health Administration announces a final rule that will enhance the quality of working place examinations in metal and nonmetal mines. The final rule improves miners’ safety and health by requiring mine operators to: (1) conduct working place examinations to identify hazards before work begins in an area, (2) notify affected miners of hazardous conditions that are not corrected immediately; and (3) record the locations examined, the adverse conditions found, and the date of the corrective action.
Check out the MSHA page here or
Download PDF of final rule here.
On December 19, 2016, a 62-year old Front-end Loader Operator with 6 years of mining experience was fatally injured at a sand and gravel surface mine. The victim was engulfed by sand when entered a hopper to remove a blockage.
Best Practices
Click here for: MSHA Preliminary Report (pdf), MSHA Investigation Report (pdf), Overview (pdf).
On September 15, 2016, a 60 year old Mechanic, with 28 years of experience, was fatally injured at a Magnesite facility. The victim was seriously injured when he fell while dismounting a front end loader. The victim was hospitalized and died on September 26, 2016.
Best Practices
Click here for: MSHA Preliminary Report (pdf), MSHA Investigation Report (pdf), Overview (pdf).
On September 21, 2016, a 52 year old contract drill operator / mechanic, with more than 30 years of experience, was killed at a limestone mine while performing maintenance on a truck-mounted rotary drill. At the time of the accident, the victim was attempting to remove the spindle cap from the top of the drill head while standing on the drilling deck. The victim was using a modified pipe wrench in an attempt to loosen the spindle cap using the machine’s drill rotation hydraulics by reaching into the operator’s compartment. As the victim activated the drill rotation lever, the wrench swung and struck him. The force of the impact knocked him against the operator’s cab, denting the frame and breaking the side window while the rotating wrench pierced his abdomen. As the victim attempted to climb down an adjacent step ladder, he was observed falling to the ground and striking his head. The victim was transported to a local hospital and died later that day as a result of his injuries.
Best Practices
Click here for: MSHA Preliminary Report (pdf), MSHA Investigation Report (pdf), Overview (pdf).
On September 8, 2016, a 58-year old Haul Truck Operator with 23 years of experience was killed at a granite mine. The victim was operating a Caterpillar 773E haul truck and was returning to the pit to be loaded with shot rock. The truck veered from the right side of the haul road to the left and traveled over the berm at the top of the highwall. The truck landed upside down approximately 150 feet below. The victim was found outside the haul truck.
Best Practices
Click here for: MSHA Preliminary Report (pdf), MSHA Investigation Report (pdf), Overview (pdf).
On August 9, 2016, a 33 year old Leadman Contractor, with 4 years of experience, was killed at a cement plant loadout. The victim was attempting to replace the lift cable pulleys on the barge loadout chute, when the anchor point for the temporary rigging separated from the loadout chute and it unexpectedly fell. The falling loadout chute caused the lift cables to tighten and the lift cables pinned the victim to the loadout chute causing fatal injuries.
Best Practices
Click here for: MSHA Preliminary Report (pdf), MSHA Investigation Report (pdf), Overview (pdf).
On July 25, 2016, a 59 year old Excavator Operator, with 17 years of experience, was killed at a limestone quarry. Prior to the accident, the victim was loading shot rock into haul trucks. While waiting for the haul trucks to return, the victim was separating out over sized rocks when the cab of his excavator was struck by falling material from the highwall.
Best Practices
Refer to PIB P10-09 ‘Safety Precautions for Operating Rubber Tired and Track-Mounted Excavators’ for additional information regarding hazards related to operating excavators at surface mines.
Click here for: MSHA Preliminary Report (pdf), MSHA Investigation Report (pdf), Overview (pdf).
On June 27, 2016, a 61-year old Mine Superintendent, with 24 years of experience, was killed at a limestone quarry. The victim was building a ramp to the lower bench, was positioning his haul truck to dump a load of material near the edge of a highwall, and rolled backwards over the 90 foot highwall.
Best Practices
Click here for: MSHA Preliminary Report (pdf), MSHA Investigation Report (pdf), Overview (pdf).