On Saturday, July 14, 2012, a 25-year old water truck driver with 31 weeks of experience was killed at a surface mine. The victim was driving a water truck down a grade in an active work area of the mine when he lost control of the truck. The truck struck a berm on the right side of the roadway, traveled across the roadway, struck an embankment on the left side of the roadway and overturned, ending up facing opposite the original direction of travel. The victim was found ejected from the truck.
- Train all employees thoroughly on proper work procedures, hazard recognition and avoidance, and proper use of roadway berms.
- Conduct pre-operational checks to identify defects that may affect the safe operation of equipment before being placed into service.
- Never operate a truck or other mobile equipment without using a seat belt.
- Know the truck’s capabilities, operating ranges, load-limits, and maintain the brakes and other safety features properly.
- Construct roadway berms to appropriate strengths and geometries. Ensure all grades and haulage roads are appropriate for the haulage equipment being used.
- Maintain control of equipment at all times, making allowances for the prevailing conditions (low visibility, inclement weather, etc).
- Observe all speed limits, traffic rules, and ensure that grades on haulage roads are appropriate for haulage equipment being used.
- Always select the proper gear and downshift well in advance of descending the grade.
- Maintain equipment braking and steering systems in good repair and adjustment. Never rely on engine brakes and transmission retarders as substitutes for keeping brakes properly maintained.
- Monitor work habits routinely and examine work areas to ensure that safe work procedures are followed.
- Do not attempt to exit or jump from a moving vehicle .
Click here for: MSHA Preliminary Report (pdf), MSHA Investigation Report (pdf).